Making Your Own Replacement Key For Saab 93 Viggen
Saab owners who have lost the key to their car might be worried about the expense and hassle of getting an additional key. You can avoid these expenses by making your key fob yourself.
You'll require a phillips screwdriver with a flat head to accomplish this. Place the screwdriver in the slot located in the middle of the case, and slowly push it open.
Cost
Some used cars only have one key, but most SAABs come with two keys. In this situation the owner will need to purchase the new key. This can be costly. There are saab 9-3 key programming to save on this procedure. If you're only looking to replace the case for your key fob and not the badge or emergency key, you can save some money by purchasing a used case from dealerships. However, you must be aware that these cases don't contain the emergency key or badge and are more prone to wear out quickly.
You'll also need to pay for installation and programming the TWICE module. These expenses can quickly increase, especially if there is no spare key.
It is essential to have two keys to your car. If you lose your only key, you will not be in a position to get transportation.
The good news is that adding an additional key to your Saab 9-3 is not so difficult as it could seem. The only issue is that you'll need to pair the key with the car's computers. This can be accomplished by a dealer, however it might take some time to make an appointment. Luckily, you can locate the information you require online to assist you with the process.
Installation
The majority of Saab vehicles built after 1995 come with an immobilizer system which uses keys to control the engine. The system also controls remote and door locks for the vehicle. It is crucial to keep an extra key in case you lose your original key and thereby having your vehicle stolen. If you lose your primary Saab working key, there are a variety of ways to replace it, without having to pay for costly dealer services.
First, you need to prepare the new keyfob. This can be done by using the flathead screwdriver for prying the case open. Put the screwdriver into the small opening in the middle of the case and gently work the screwdriver. If you're having trouble, try using different angles. After you've opened the case, you'll be able to remove the electronics and put them back in the new case.
Once you have the replacement fob and the key, you can begin the programming process. It is necessary to connect your Tech2 and follow the instructions for NG 9-3 with or without transponders. It is recommended to get a replacement TWICE that is already connected to the correct key with a transponder. You can locate this type of unit on the internet however, you must be sure that the replacement is an OEM part.
Programming
Tech 2 Tech 2 is required to include an additional key in a Saab 9-3. This also involves programming the vehicle to recognize the new keys. This is a far more complex process than just copying a key made of metal. It should be handled by a professional to avoid damaging the electronic system of the vehicle. If you're considering adding the spare key to your vehicle, it's best to get it done as soon as you can. In the event of delay, it could result in higher costs in the future.
In addition to putting in an alternative key, you'll need to replace the CIM or TWICE module. This is usually a mail-order procedure, and it's not something you can accomplish through an aftermarket vendor. The cost of purchasing a new car can be high, based on the model.
The dealer will charge the highest dollar to replace the car computer, but there's an alternative option! S.A. Locksmith & Security will reprogram your Saab computer to prepare it for the new key. This will help you save the expense of buying a new car computer. This service is fast and inexpensive, and it is simple. It could save you up to 50% or more when compared to what a dealer would charge you! This is a great option for those who have lost their keys.
Remotes
The Saab 9-3 Viggen is one of the most unique cars ever to sport the Saab badge. It was an Scandinavian, front-drive fighter jet-inspired beast that was fast as a nut and fun to drive. Many other Saab models were released, but none were as unique.
If you have a 9-3 Saab and lose your key fob it is crucial to replace it as quickly as you can. Saab vehicles have an immobilizer feature, which requires a key that is unique to activate. The replacement process is simple if you have an extra key, however it can be expensive and time-consuming if there isn't a spare.
You can save money by purchasing a used replacement key fob and getting it programmed by a locksmith in your area. Be careful when buying used keys on eBay and other online outlets. They may not be genuine and you may end paying more in the end.
Anyone can take out the electronics and battery from an old key fob with the small screwdriver that is flathead. Be cautious not to harm the tiny electronic components inside the case. You should also be careful not to pour liquids onto the interior of the case as it can cause damage. Avoid purchasing cloned keys from second-hand sellers, since they might not have been linked to the CIM of the car you own.